DCS-950G on Webpage Need Help

Question and comments on the D-Link DCS-2100+ Internet Camera
Post Reply
Posts: 1
Joined: Sun Dec 04, 2005 3:02 pm

DCS-950G on Webpage Need Help

Post by TVB »

Hi Forum ;-)

Newbee q.

I have tryed to get at stream on my Web page with this camera and No Luckt yet :-(

I use this script from Windows player Is That possible ?

<!--webbot bot="HTMLMarkup" startspan --> <p align="center"><!--webbot bot="HTMLMarkup" startspan --><object classid="clsid:6BF52A52-394A-11D3-B153-00C04F79FAA6" id="WindowsMediaPlayer2" width="640" height="480">
<param name="URL" value="http://xx.xxx.xxx.xx/">
<param name="rate" value="1">
<param name="balance" value="0">
<param name="currentPosition" value="0">
<param name="defaultFrame" value>
<param name="playCount" value="1">
<param name="autoStart" value="-1">
<param name="currentMarker" value="0">
<param name="invokeURLs" value="-1">
<param name="baseURL" value>
<param name="volume" value="50">
<param name="mute" value="0">
<param name="uiMode" value="full">
<param name="stretchToFit" value="0">
<param name="windowlessVideo" value="0">
<param name="enabled" value="-1">
<param name="enableContextMenu" value="-1">
<param name="fullScreen" value="0">
<param name="SAMIStyle" value>
<param name="SAMILang" value>
<param name="SAMIFilename" value>
<param name="captioningID" value>
</object><!--webbot bot="HTMLMarkup" endspan --><!--webbot
bot="HTMLMarkup" endspan -->

IP is static and Ip is xxx and Cam ip is and the port is 8080

I have also tyed to get the script on this page 2 work, but still the same (Newbee ;-)

I cant figure out how 2 set the adress 2 cam ,,, and do i have 2 put the Domaine name in the adress or is enougth 2 point on the IP ?

is this rigth


Thanks alot
Post Reply